Vital

Peptides

How to Read a Peptide Vial Label: mg, Lot, Expiry

How to read a peptide vial label step by step: total mg vs mg per mL, blend labels, lot number and expiry, the 28-day rule for opened vials, and what a research use only label means.

Last reviewed

The Vital angle

Vital's label scanner reads a photo of a vial, pen, carton or pharmacy label and fills in the name, strength, total vial volume, route, frequency and expiration date, which you can edit before saving. Each dose log has an optional lot number field, and dose details show the lot and expiry when saved.

How to read a peptide vial label: the short answer

Here is how to read a peptide vial label. Find five things in order: the name of each peptide, the amount (total mg, or mg per mL), the form (powder or liquid), the lot number, and the expiration date. Then check who made it and what the label says the product is for. These items tell you what is in the vial, how to work out a draw, and whether the vial is still in date.

The most common error is to mix up total mass and concentration. "10 mg" on a powder vial is the total amount of peptide in the vial. "10 mg/2.4 mL" on a liquid vial means 10 mg spread through 2.4 mL. The two need different math. This guide goes through each part of the label and shows the math with clearly labeled examples. It does not recommend a dose. Confirm every draw with your prescriber or pharmacist.

The parts of a vial label

Label item Where it usually is What it tells you
Peptide name Top line, largest text What the vial holds. A blend lists each part
Amount Next to or under the name Total mg, or mg per mL for a liquid
Form Near the amount Powder (lyophilized) or solution
Volume On liquid vials Total mL in the vial
Lot number Small print, often "LOT" The batch. Use it to match a certificate of analysis or a recall
Expiration date Small print, often "EXP" Last date for the unopened vial
Maker or pharmacy Side or bottom Who is responsible for the product
Storage Side panel Temperature and light rules
Intended use Anywhere For example "Rx only" or "for research use only"

A pharmacy label from a compounder also has your name, the prescriber, the directions and a beyond-use date. A seller vial may have only a name, a number and a lot.

Peptide label mg: total mass vs concentration

Read the units right after the number. They decide the math.

Powder vials. A label such as "Peptide X 10 mg" on freeze-dried powder means the whole vial holds 10 mg. The concentration does not exist until you add water. Math example: 10 mg mixed with 2 mL of water is 10 ÷ 2 = 5 mg per mL. On a U-100 syringe, 10 units (0.1 mL) of that liquid hold 0.5 mg. Confirm the draw with your prescriber or pharmacist. See how to reconstitute peptides with BAC water.

Liquid vials. A label shows both the mass and the volume. The Zepbound multi-dose vial is one example. Its label lists strengths such as 10 mg/2.4 mL (4.17 mg/mL), for four 2.5 mg/0.6 mL doses. Here the concentration is already set, and the label tells you the volume per labeled dose.

mg vs mcg. 1 mg is 1,000 mcg. A label in mcg uses a number 1,000 times larger for the same amount. Check the unit twice, because a mix-up is a 1,000-fold error.

To turn a concentration into syringe units, see how to read an insulin syringe for peptides or use the free peptide calculator. For counts per vial, see how many doses are in a vial.

How to read a blend label

A blend vial holds more than one peptide, and its label must be read part by part.

  • Look for the mass of each part. A good label lists each one, such as "GHK-Cu 50 mg / BPC-157 10 mg / TB-500 10 mg."
  • Do not rely on the total. "Glow 70 mg" tells you the sum, not the split. Sellers use the same name for different ratios.
  • Work out each part separately. After mixing, divide each part's mass by the water volume. Every draw holds all parts in the same ratio.

Math example: a hypothetical 70 mg blend of 50, 10 and 10 mg mixed with 5 mL is 10, 2 and 2 mg per mL. Confirm any draw from a blend with your prescriber or pharmacist. For more, see the Glow peptide blend guide and the KLOW blend guide.

Lot number and expiry

The lot number names the batch. It links the vial to a certificate of analysis, and it is how a recall finds you. Write it down before the first use. If a seller's certificate shows a different lot number from the vial, the certificate does not describe your vial.

The expiration date applies to the unopened vial stored as the label says. Some labels show only a month and year. Read it as the month and year printed. Do not add a day that the label does not show.

Once you open a vial, a second date matters. The CDC says that an opened multi-dose vial should be dated and discarded within 28 days, unless the maker gives a different date for the opened vial. A maker's date can differ. The Zepbound label lists throwing away an opened multi-dose vial after 30 days at room temperature, 30 days after first use, or after 4 weekly doses, even if medicine is left in it. Write the date you first opened or mixed the vial on the label or in your log. See compounded GLP-1 vial storage.

What a "research use only" label means

"For research use only" or "not for human consumption" means the seller does not present the product as a drug for people. It is not made, tested or labeled to drug standards, so its identity, sterility and labeled mass are not assured.

The FDA looks past that wording. In an August 24, 2026 warning letter to one peptide seller, the FDA wrote that, despite "research use only" statements on the labeling, evidence from the seller's website established that the products were intended to be drugs for human use. The FDA also noted that the seller sold bacteriostatic water for mixing, which provides the means to prepare an injectable drug. A research label next to human dosing advice is a red flag, not a safety statement.

For a full source check, see how to check a peptide catalog source.

Use a label scanner app to log the vial

Vital has a label scanner. You take a photo of a vial, pen, carton or pharmacy label, and Vital reads what it can: the name, the strength, the total vial volume, the route, the frequency and the expiration date. You can edit each fact before you save it. If the photo is hard to read, Vital asks you to try again with the label flat, well lit and fully inside the frame.

Each dose log has an optional lot number field, and the dose details show the lot and the expiry date when they are saved. That keeps the batch with every dose, which helps if a recall or a reaction comes up. Vital is a tracking tool. A scan does not check that a product is genuine, sterile or right for you. Compare other options in the best peptide tracker app.

Red flags on a vial label

Do not use a vial, and ask a pharmacist, if:

  • The label has no lot number or no expiration date.
  • The label shows only a blend total and no amount for each part.
  • The unit is unclear, such as a number with no mg or mcg.
  • The label, the carton and the certificate show different names, amounts or lot numbers.
  • The liquid is cloudy, has particles, or the powder looks wet or melted.
  • The vial is past its expiration date or past its date after opening.

Get medical care right away for a hot, red, spreading or very painful injection site, or a fever after an injection. Get emergency care for swelling of the face or throat, hives over the body, or trouble breathing.


Zepbound® is a trademark of Eli Lilly and Company. Vital is independent and not affiliated with these companies.

Free toolPeptide reconstitution calculator

Things to watch

Practical flags drawn from prescribing information and clinical guidance. Vital surfaces these in the dose log to help you spot them early.

  • Total mass read as concentration

    10 mg on a powder vial is the whole amount in the vial. 10 mg/2.4 mL on a liquid vial is spread through 2.4 mL. The two need different math.

  • mg and mcg mix-ups

    1 mg is 1,000 mcg, so reading the wrong unit is a 1,000-fold error.

  • Blend labels with only a total

    A label such as Glow 70 mg gives the sum, not the mass of each part, and sellers use one name for different ratios.

  • Opened vials past their date

    The CDC says an opened multi-dose vial should be dated and discarded within 28 days unless the maker gives a different date. The Zepbound label lists 30 days after first use or 4 weekly doses.

  • Research use only labels

    These products are not made or tested as drugs for people. The FDA has said such wording does not change intended use when a seller's website shows human use.

Frequently asked questions

  • On a powder vial, mg is the total amount of peptide in the whole vial. On a liquid vial, the label shows mg per mL, or mg in a stated volume. Check which one your vial shows before you do any math.

  • It is usually in small print marked LOT, near the expiration date. Write it down before first use, and check that it matches the lot on any certificate of analysis.

  • The CDC says an opened multi-dose vial should be discarded within 28 days unless the maker gives a different date. Follow the date on your label or ask your pharmacist.

  • It means the product is not made, tested or labeled as a drug for people. Its identity, sterility and labeled mass are not assured. The FDA has said the wording does not change intended use.

  • Look for the mass of each part, not only the total. After mixing, divide each part's mass by the water volume to get its mg per mL. Every draw holds all parts in the same ratio.

  • Vital can read a photo of a vial, pen, carton or pharmacy label and fill in the name, strength, volume, route, frequency and expiry for you to check. A scan does not show that a product is genuine or sterile.

Sources

  1. Preventing Unsafe Injection Practices · Centers for Disease Control and Prevention
  2. Zepbound (tirzepatide) injection prescribing information · DailyMed, U.S. National Library of Medicine
  3. Warning Letter: Peptide Partners LLC, MARCS-CMS 735063, August 24, 2026 · U.S. Food and Drug Administration
  4. Certain Bulk Drug Substances for Use in Compounding that May Present Significant Safety Risks · U.S. Food and Drug Administration
  5. Vital - Track Peptide & GLP-1 · Apple App Store

This page summarizes publicly available information from the sources listed above and is for educational use only. It is not medical advice. Consult a qualified healthcare professional for personal dosing guidance.

Track every shot, every change

Vital logs every GLP-1 injection and peptide dose, then surfaces patterns your scale can't show. Free on iOS and Android.