Pens, storage, and missed doses
Peptide Reconstitution Calculator: BAC Water Ratio and Math
How peptide reconstitution works, how a BAC water ratio sets the concentration in mg per mL, the sterile steps for mixing a vial, and how to store it after mixing.
Last reviewed
The Vital angle
Vital has a reconstitution readout: enter the mg in the vial and the mL of water you added, and it shows the concentration, the U-100 units and mL to draw for the amount your prescriber set, and the doses per vial. You can also scan a vial label to start a new item, and the app warns when a draw is more than a 1 mL syringe holds.
What a peptide reconstitution calculator does
Many peptides come as a dry powder in a sealed vial. Before use, the powder is dissolved in a liquid, often bacteriostatic water. This step is called reconstitution. A peptide reconstitution calculator does one job: it turns the mg of powder and the mL of liquid into a concentration, and then turns an amount into a volume to draw.
The calculator is only arithmetic. It cannot tell you what amount to use, how often, or for how long. It also cannot check that the vial contains what the label says. Those questions belong to a prescriber and a licensed pharmacist.
A safety note first. Many peptides sold online are not approved drugs. BPC-157, TB-500, KPV, GHK-Cu for injection, and MOTS-c are not FDA-approved drugs. The FDA lists them on its page of bulk drug substances that may present significant safety risks in compounding. For these substances, it cites possible immune reactions, impurities, and limited or no human safety data. A clean calculation does not make an unapproved product safe.
What bacteriostatic water is
Bacteriostatic Water for Injection, USP is sterile water with a small amount of benzyl alcohol added as a preservative. One FDA-approved label lists 0.9% for its 30 mL vial and 1.1% for its 20 mL vial. The preservative slows the growth of bacteria, so the vial can be entered more than once. The FDA-approved label on DailyMed says it is for diluting or dissolving drugs for injection only.
Important points from that label:
- It is marked "NOT FOR USE IN NEONATES," because benzyl alcohol has been linked to toxicity in newborns.
- It is not for injection by itself into a vein, because the label warns that it can cause hemolysis, the breakdown of red blood cells.
- Each entry into the vial needs clean, aseptic technique.
Sterile water without a preservative is a different product. Some drug labels call for one and not the other. Use the liquid that your pharmacist or the drug label names.
The concentration math, step by step
The numbers below are hypothetical round numbers that show the arithmetic. They are math examples only, not doses, and not a suggested mix.
- Concentration (mg per mL). Divide the mg in the vial by the mL of liquid added. Math example: a 10 mg vial with 2 mL of liquid gives 10 ÷ 2 = 5 mg per mL.
- Volume to draw (mL). Divide the amount by the concentration. Math example: 1 mg at 5 mg per mL is 1 ÷ 5 = 0.2 mL.
- Units on a U-100 syringe. Multiply mL by 100. Math example: 0.2 mL is 20 units.
- Draws per vial. Divide the mg in the vial by the amount per draw. Math example: 10 mg ÷ 1 mg = 10 draws, before any loss in the needle and the vial.
If the amount is in micrograms (mcg), convert first: 1 mg = 1,000 mcg. A math example: 250 mcg is 0.25 mg.
Confirm every draw with your prescriber or pharmacist before you inject. The FDA has reported hospital visits caused by mix-ups between mg, mL, and units, including tenfold errors on a U-100 syringe. For the units side of the math, see retatrutide dose in units and U-40 vs U-100 syringes.
How the BAC water ratio changes the result
A "10mg peptide 2ml" mix is not a rule. It is one possible ratio, and the ratio sets every number after it. Math example with the same hypothetical 10 mg vial:
| Liquid added | Concentration | U-100 units for a 1 mg math example |
|---|---|---|
| 1 mL | 10 mg/mL | 10 units |
| 2 mL | 5 mg/mL | 20 units |
| 5 mL | 2 mg/mL | 50 units |
More liquid makes each unit weaker and each draw larger. Less liquid makes each unit stronger, so a one-unit misread is a bigger error. Ask the person who prescribed the product which volume of liquid to add, and write the concentration on the vial.
Do not change the volume of liquid between vials without new instructions. A different ratio means a different number of units for the same mg amount.
Sterile technique for mixing a vial
These are general aseptic steps. The CDC says to use a new sterile needle and syringe and never to leave a needle in a vial stopper. Follow the instructions from your pharmacist if they differ.
- Wash your hands with soap and water, and work on a clean, dry surface.
- Check both vials. Do not use a vial that is cracked, past its date, or has a damaged seal.
- Remove the caps and wipe each rubber stopper with a new alcohol swab. Let the stoppers dry.
- Use a new, sterile needle and syringe. Never reuse a needle or syringe, and never leave a needle in a stopper.
- Draw the liquid volume your pharmacist named.
- Insert the needle into the peptide vial and let the liquid run slowly down the inside glass wall, not straight onto the powder.
- Swirl the vial gently or roll it between your palms until the powder dissolves. Do not shake it hard, because shaking can damage some peptides and make foam.
- Check that the liquid is clear, with no particles, unless the label says otherwise.
- Label the vial with the date mixed, the volume added, and the concentration.
Put used needles in an FDA-cleared sharps container. For injection steps, see injection technique.
Storage after mixing
Storage rules come from the product label or the pharmacy, not from a general guide. Common points:
- Many mixed peptide vials are kept in the refrigerator. Use the main body of the fridge, not the door, and do not let the vial freeze.
- Keep the vial out of light, in its box if it has one.
- The CDC says an opened multi-dose vial should be dated and discarded within 28 days unless the manufacturer gives a different date. Use the earlier of that date and any date on the label.
- Unmixed bacteriostatic water is stored at controlled room temperature, 20 to 25°C, according to its label.
For more on dates and warning signs, see compounded GLP-1 vial storage.
Mixing peptides in one vial or one syringe
Some people ask about mixing two peptides in one vial or drawing two into one syringe. There is no approved guidance for most of these combinations. Two compounds can react, change each other's stability, or make the amount of each one hard to know. A blend also makes the math harder, because each compound has its own share of the liquid. Ask a pharmacist before you combine products. For more, see stacking peptides with GLP-1 medicines, the KLOW peptide blend guide, and the Wolverine stack guide.
When to stop and get help
Do not use the vial, and call your pharmacist, if the liquid is cloudy, has particles, or changes color, or if you are not sure of the concentration.
Get medical care right away for any of these after an injection:
- Swelling of the face, lips, or throat, hives, or trouble breathing.
- Fever, spreading redness, warmth, or pus at the injection site.
- Chest pain, a racing heartbeat, or fainting.
- Severe stomach pain or vomiting that does not stop.
For milder skin changes, see peptide injection site reactions. If you think you injected too much, call Poison Help at 1-800-222-1222.
Things to watch
Practical flags drawn from prescribing information and clinical guidance. Vital surfaces these in the dose log to help you spot them early.
Unapproved injectable peptides
BPC-157, TB-500, KPV, GHK-Cu for injection, and MOTS-c are not FDA-approved drugs. The FDA cites possible immune reactions, impurities, and limited human safety data for these substances in compounding.
Changing the BAC water volume between vials
The volume of liquid sets the concentration. A different volume means a different number of units for the same mg amount.
Benzyl alcohol in bacteriostatic water
The FDA-approved label says bacteriostatic water is not for use in neonates, because benzyl alcohol has been linked to toxicity in newborns.
Reusing needles or leaving one in the stopper
The CDC says to use a new sterile needle and syringe for each entry and never to leave a needle in a vial stopper, to lower the risk of contamination.
Using a mixed vial past 28 days
The CDC says an opened multi-dose vial should be dated and discarded within 28 days unless the manufacturer gives a different date.
mg, mcg, and unit mix-ups
The FDA has reported hospital visits from confusion between mg, mL, and units when patients draw from vials, including tenfold errors.
Frequently asked questions
Divide the mg of peptide in the vial by the mL of liquid you add. As a math example, 10 mg with 2 mL of liquid is 5 mg per mL. Confirm the numbers with your pharmacist.
There is no single correct volume. The volume sets the concentration, and the right one depends on the product and the instructions from your prescriber or pharmacist. Ask them before you mix.
As a math example only, 10 mg in 2 mL is 5 mg per mL, so 1 mg is 0.2 mL, which is 20 units on a U-100 syringe. This is not a dose. Confirm every draw with your prescriber or pharmacist.
General guidance is to let the liquid run down the side of the vial and swirl or roll it gently until the powder dissolves. Hard shaking can make foam and can damage some peptides.
Follow the product label or your pharmacy. The CDC says an opened multi-dose vial should be dated and discarded within 28 days unless the manufacturer gives another date. Use the earlier date.
Most combinations have no approved guidance. Two compounds can affect each other's stability, and a blend makes the amount of each one harder to know. Ask a pharmacist before you combine products.
Sources
- BACTERIOSTATIC WATER injection, solution (Hospira label) · DailyMed, U.S. National Library of Medicine
- Certain Bulk Drug Substances for Use in Compounding that May Present Significant Safety Risks · U.S. Food and Drug Administration
- Preventing Unsafe Injection Practices · Centers for Disease Control and Prevention
- FDA alerts health care providers, compounders and patients of dosing errors associated with compounded injectable semaglutide products · U.S. Food and Drug Administration
- Safely Using Sharps (Needles and Syringes) at Home, at Work and on Travel · U.S. Food and Drug Administration
This page summarizes publicly available information from the sources listed above and is for educational use only. It is not medical advice. Consult a qualified healthcare professional for personal dosing guidance.
Track every shot, every change
Vital logs every GLP-1 injection and peptide dose, then surfaces patterns your scale can't show. Free on iOS and Android.
More from the Library
Compounded Semaglutide Storage: Vials, Beyond-Use Dates, and Warning Signs
How to store compounded semaglutide and tirzepatide vials, what a beyond-use date means, and the signs that a vial may be compromised and should not be used.
Ozempic Left Out of the Fridge? Room-Temperature Limits by Brand
Each GLP-1 label gives its own room-temperature limit, and every one says not to use a pen that froze. Here is what the Ozempic, Wegovy, Mounjaro, and Zepbound labels allow, and what to do next.
Can't Find Your Wegovy or Zepbound Dose? Options to Discuss
The national GLP-1 shortages are over, but a local pharmacy can still run out of one strength. Here are the options to raise with your pharmacist and prescriber, and the records that make each call shorter.
How to Read Insulin Syringe Units: Tick Marks on 0.3, 0.5, and 1 mL Barrels
How to read insulin syringe units on a U-100 barrel, what each line means on a 30, 50, and 100 unit syringe, how units convert to mL, and the misreads that cause dosing errors.