Vital

Pens, storage, and missed doses

Zepbound Pen Not Working: Pen, Vial, and KwikPen Fixes

What to check when a Zepbound pen is not working, the button will not press, the gray plunger does not show, or medicine is left in a vial, from Lilly's instructions for use.

Last reviewed

The Vital angle

Vital lets you log each Zepbound dose with its form, site, lot number, expiration date, and a note about what went wrong, so you have the facts ready when you call Lilly or your pharmacy. Dose reminders and site rotation help you stay on your usual schedule once you have a replacement.

Zepbound pen not working: find out which device you have

When a Zepbound pen is not working, the right fix depends on the device in your hand. Zepbound® now comes in four forms in the US, and each has its own Lilly instructions for use (IFU):

  • Single-dose pen. An autoinjector with a gray base cap, a lock ring, and a purple injection button. One pen, one dose.
  • Single-dose vial. You draw 0.5 mL into a syringe that is supplied separately.
  • Multi-dose vial. Holds 4 weekly doses of 0.6 mL each.
  • KwikPen. A dial pen that holds 4 fixed weekly doses and uses a new pen needle each time.

Most searches for "zepbound pen not working" are about the single-dose pen, so this guide starts there. The vial and KwikPen sections follow.

The single-dose pen will not activate

The single-dose pen has a safety lock. It will not fire until it is unlocked, and the IFU says to unlock it only after the clear base sits flat on your skin. Most "the button will not press" moments come from the order of the steps.

The IFU order is:

  1. Take the pen from the refrigerator. You do not need to warm it to room temperature.
  2. Check the label for the right medicine, dose, and expiration date. Check that the liquid is colorless to slightly yellow, not cloudy, not frozen, and free of particles.
  3. Make sure the pen is locked, then pull the gray base cap straight off. Do not put it back on, because that can damage the needle.
  4. Place the clear base flat against your skin.
  5. Turn the lock ring to unlock.
  6. Press and hold the purple button for up to 10 seconds.

If the button does not move, check two things. Is the lock ring fully turned to the unlock position? Is the clear base flat on the skin, not tilted? Do not press harder against a locked pen, and do not try to open it.

The IFU covers one more case. If you unlocked the pen and pressed the button before you pulled off the gray base cap, do not remove the cap. Throw the pen away and get a new one.

How to tell if the injection worked

The IFU says to listen for two clicks. The first click means the injection started. The second click means it is complete. You know the dose went in when the gray plunger is visible in the pen.

Some details that worry people but are normal, per the IFU:

  • Three clicks. Some people hear a soft click just before the second loud click. Keep the pen on your skin until the second loud click.
  • A drop on the needle when you remove the base cap.
  • Air bubbles in the pen.
  • A drop of liquid or blood on the skin after the injection. Press with gauze or a cotton ball, and do not rub.

If you are not sure the pen worked and you cannot see the gray plunger, the IFU says to contact Lilly at 1-800-545-5979 (1-800-Lilly-Rx) for instructions. Until then, store the pen safely so no one gets a needle stick. Do not take a second pen to make up the dose. Ask Lilly, your pharmacist, or your prescriber what to do, and see the missed dose guide for general background.

A dropped pen or a pen left out

The single-dose pen has glass parts. The IFU says that if you drop it on a hard surface, do not use it. Use a new pen instead.

Temperature also matters. Per the label, you can keep a single-dose pen unrefrigerated, up to 86°F (30°C), for a total of 21 days. After 21 days at room temperature, throw it away. Do not use a pen that has been frozen. Keep pens in the carton to protect them from light. If a pen sat in a hot car or arrived warm, see GLP-1 left out of the fridge and call your pharmacist before you use it.

Single-dose vial: medicine left in the vial

People who use the single-dose vial often notice liquid left after they draw the dose. The IFU says to draw 0.5 mL and then to throw away the opened vial after use, even if medicine is left in it. The leftover liquid is not a second dose.

If you cannot draw a full 0.5 mL:

  1. Check that you pushed 0.5 mL of air into the vial first. The IFU uses this step to make the liquid easier to draw.
  2. Turn the vial and syringe upside down and keep the needle tip in the liquid.
  3. Tap out air bubbles, then push the plunger back to the 0.5 mL line.

The IFU also says to leave the needle in the skin for at least 5 seconds. Use a new syringe and needle each time to prevent infection and blocked needles. Do not mix Zepbound with any other medicine. If the dose still looks short, ask your pharmacist before you open a second vial.

Multi-dose vial and KwikPen problems

These two forms each hold 4 weekly doses. The label says to throw them away after 4 doses, 30 days after first use, or 30 days at room temperature, whichever comes first, even if medicine is left.

The KwikPen IFU says to prime before every weekly dose. You dial until you hear 2 clicks and see the prime line, point the needle up, tap out air, and push the knob in for a slow count of 5. A drop at the needle tip means the pen is primed. If no drop appears:

  1. Repeat the prime steps no more than 2 more times.
  2. If there is still no drop, change the pen needle and try 1 more time.
  3. If there is still no drop, contact Lilly at 1-800-545-5979.

The KwikPen troubleshooting section also says:

  • The knob is hard to push. Push more slowly. The needle may be blocked, so put on a new one and prime. Dust, food, or liquid inside the pen means you need a new pen.
  • The knob will not turn to the dose icon. There may not be enough medicine for a full dose. Throw the pen away and do not inject what is left.
  • The icon was not in the window after the injection. Put the needle back in and finish. Do not redial. If you still think the dose was short, do not repeat it. Call Lilly or your prescriber.

Prepare before you call Lilly or the pharmacy

Lilly and your pharmacy can help faster when you have the facts ready:

  1. The form (single-dose pen, vial, or KwikPen) and the strength.
  2. The lot number and expiration date from the label or carton.
  3. What you saw: no click, one click, no gray plunger, a leak, or a stuck knob.
  4. The date and time of the attempt and your usual dose day.

Keep the faulty pen in a sharps container or a safe place in case Lilly asks about it. For site choice and rotation, see injection technique.

Symptoms that need care now

A device fault is a supply problem. Some symptoms are not. The Zepbound Medication Guide says to call your healthcare provider right away for severe pain in your stomach area that will not go away, with or without nausea or vomiting. The pain can spread to the back. Get medical help right away for signs of a serious allergic reaction:

  • Swelling of the face, lips, tongue, or throat.
  • Problems breathing or swallowing.
  • Severe rash or itching.
  • Fainting or feeling dizzy, or a very rapid heartbeat.

If you inject more than intended by mistake, call your prescriber or Poison Help at 1-800-222-1222.


Zepbound® and KwikPen® are trademarks of Eli Lilly and Company. Vital is independent and not affiliated with these companies.

Free toolPeptide reconstitution calculator

Things to watch

Practical flags drawn from prescribing information and clinical guidance. Vital surfaces these in the dose log to help you spot them early.

  • Unlocking the single-dose pen before it is on the skin

    The instructions say to unlock only after the clear base is flat on the skin. If you unlock and press the button with the gray base cap still on, leave the cap on and throw the pen away.

  • Using a single-dose pen after a drop

    The pen has glass parts. Lilly's instructions say not to use a pen that was dropped on a hard surface.

  • Taking a second dose when the gray plunger is not visible

    The instructions say to contact Lilly for further instructions if you cannot see the gray plunger. Ask Lilly or your prescriber before you inject again.

  • Saving leftover medicine from a single-dose vial

    The single-dose vial is for one 0.5 mL dose. The instructions say to throw away opened vials after use, even if medicine is left.

  • Injecting leftover medicine from a KwikPen or multi-dose vial

    Both hold 4 weekly doses. The label says to throw them away after 4 doses or 30 days, because the leftover medicine can give an incomplete dose.

  • More than 21 days at room temperature for a pen or single-dose vial

    The label allows a total of 21 days unrefrigerated, up to 86°F (30°C). After that, throw the pen or vial away.

Frequently asked questions

  • The single-dose pen will not fire while it is locked. Pull off the gray base cap, place the clear base flat on the skin, turn the lock ring to unlock, then press and hold the purple button for up to 10 seconds. If it still does not move, do not force it, and call Lilly at 1-800-545-5979.

  • Listen for two clicks. The first means the injection started and the second means it is complete. The dose was delivered when the gray plunger is visible. If you cannot see it, contact Lilly for instructions before you take any further action.

  • Lilly's instructions say some people hear a soft click right before the second loud click, and that this is normal. Keep the pen on your skin until the second loud click, then check for the gray plunger.

  • The single-dose vial is for one 0.5 mL dose, and some liquid can stay in it after you draw that dose. The instructions say to throw the opened vial away after use, even with medicine left. Multi-dose vials are thrown away after 4 doses or 30 days.

  • No. The single-dose pen has glass parts, and the instructions say not to use it after it falls on a hard surface. Use a new pen and ask your pharmacist about a replacement.

  • A single-dose pen or single-dose vial can stay unrefrigerated, up to 86°F (30°C), for a total of 21 days. A KwikPen or multi-dose vial is thrown away 30 days after first use or 30 days at room temperature.

Sources

  1. Zepbound Single-Dose Pen Instructions for Use · Eli Lilly and Company
  2. Zepbound Single-Dose Vial Instructions for Use · Eli Lilly and Company
  3. Zepbound KwikPen Instructions for Use · Eli Lilly and Company
  4. Zepbound Prescribing Information and Medication Guide · Eli Lilly and Company
  5. Safely Using Sharps (Needles and Syringes) at Home, at Work and on Travel · U.S. Food and Drug Administration

This page summarizes publicly available information from the sources listed above and is for educational use only. It is not medical advice. Consult a qualified healthcare professional for personal dosing guidance.

Track every shot, every change

Vital logs every GLP-1 injection and peptide dose, then surfaces patterns your scale can't show. Free on iOS and Android.